Caricabatterie

Multi-Chemistry
Support 7+ battery chemistries.
- NiMH
- NiCd
- NiZn
- Eneloop
- Lithium-Ion
- Lilo4.35
- LiFePO4

Support 42+ battery sizes
- AAAA, AAA, AA
- Sub-C, C, D
- 10340, 10350, 10440, 10500, 12340, 12500, 12650
- 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16340
- RCR123, 16500, 16650, 17350, 17500, 17650, 17670
- 18350, 18490, 18500, 18650, 18700
- 20700, 21700, 22500, 22650, 25500, 26500, 26650
- 32600**, 32650**

Powerful and Accurate
NiMH, NiCd, NiZn, Eneloop
- Charge current: Max. 3A (x4 slots)
- Discharge current: Max. 2A (x4 slots)

Lithium-Ion, Lilo4.35, LiFePO4
- Charge current: Max. 3A (x4 slots)
- Discharge current: Max. 2A (x1 slot)
- Discharge current: Max. 1A (x4 slots)
- Display Resolution Voltage: 0.01V
- Display Resolution Current: 0.01A

Effective Cooling
The built-in aluminum cooler effectively dissipates heat generated in the inside of the charger to the environment, even at slow fan speed.

Compact Display
The 128x64 pixels screen shows 5 different views during operation, see above a picture of Total Overview (TOV).

Rich User Interface
Eight Buttons for easy programming and operation. Four Slot Number Buttons (SNB) help to address the different slots. The other four buttons are for programming and operation.

Easy Programmability
In Simple and Advanced UI modes, the charger operates off 30 user-defined operation profiles. The programs can be called up and run with few clicks, very conveniently.

Secure Stand
Rubber feet and strong tilt stand elements provide a firm stand. Tilted position enhances viewing angle and cooling air flow at the bottom side.

No-nonsense Modes
There are total 6 operation modes ('Break_in' for NiMH/NiCd/Eneloop batteries only, 'Storage' for Li-Chemistry batteries only).

Charge
Charge the battery at the selected rate. Suitable for frequently used batteries.
Discharge
Discharge the batteries at the selected rate.
Refresh Analyze
Suitable for batteries stored for more than two weeks but less than 3 months or the batteries showing poor performance. This mode can also determine the battery capacity for battery matching.
Break-in
Battery forming is a charge-discharge-charge cycle which forces a full charge into the new batteries and those stored for more than 3 months at a very low rate to activate the batteries.
Cycle
Performs charge-dicharge cycle for up to 99 times. Cycle mode can remove memory effect of rechargeable batteries
Storage
Charge/Discharge a lithium battery to a voltage which is, theoretically, better for storing a long time while maintaining the maximum of its lifespan.

Maximum Safety
- Current Limit
- Capacity Limit
- Temperature Threshold
- Charging Time Limit

APP Control
BLE 4.0 technique enables user to operate the charger and view real time data and graphs via mobile application.

PC Control
User can use PC Link software to control the charger, view real time data with graphs, and also update the charger firmware through it.

Specifications:
- Input Power: DC 11-18V/4A
- Charge Current Range: 0.05-3.00A
- Discharge Current Range: 0.05-2.00A
- Max. Charge Power: 50W
- Max. Discharge Power: 15W
- Battery Chemistry Type: NiMH, NiCd, NiZn, Eneloop, Lithium-Ion, Lilo4.35, LiFePO4
- Battery Capacity: 100-50000mAh
- Operating Temperature: 0-40C
- USB Power Output: DC 5V/2.1A
- Dimensions(LxWxH): 200×124×69mm
- Weight(Without DC Adaptor): 600g